Asynchronous deposition of dense skeletal bands in Porites lutea

Alternate dense and less-dense skeletal bands in massive corals have been used for many years to record the history of growth in species such as Porites lutea and Montastrea annularis, based on the assumption that one dense band and one less-dense band is equivalent to a year's growth. This report demonstrates that specimens of Porites lutea Edwards and Haime (collected from the same neighbourhood in Phuket, Thailand, from November 1983 through November 1984) produce skeletal bands asynchronously and that one year's growth in corals from certain sites may regularly consist of four bands of varying density. The annual banding pattern observed at all sites includes the deposition of a dense band in response to high sedimentation loads and, probably, reduced light levels.     

The cause of size-assortative mating in the leaf beetle Trirhabda canadensis (Coleoptera : Chrysomelidae)

Summary Examples of positive assortative mating by body size are abundant but its causes remain controversial. I show that size-assortative mating occurs in the chrysomelid beetle Trirhabda canadensis and I test a series of alternative hypotheses to explain how this mating pattern comes about. Results suggest that assortative mating in this beetle is due to the greater ease with which size-matched pairs can achieve intromission, and not due to size-biased skews in the availability of mates or mate choice favoring large individuals. There was no correlation between male and female elytron length (a measure of body size) at the initiation of courtship, but pairs assorted positively by size at the onset of intromission. Moreover, in the laboratory, there was a negative correlation between male and female size for pairs engaged in courtship that terminated without mating. Assortative mating was not associated with a large-male mating advantage and there was no evidence of female choice of large males. Nor was there unequivocal evidence for male choice of large females; although mating females were slightly larger and considerably heavier than solitary females, males did not differ in the frequency with which they rejected large and small females. Assortative mating in T. canadensis appeared to be caused by the lower ability of mismatched pairs to achieve intromission after an encounter, both when males were larger and when they were smaller than the female.     

On the social structure of offspring rearing in the burrower bug,<Emphasis Type="Italic"> Sehirus cinctus</Emphasis> (Hemiptera: Cydnidae)

Maternal-offspring interactions are important in a variety of animals. Understanding the evolution of these interactions requires that we also study the broader social context in which they occur. To date, behavioral studies on burrower bugs, Sehirus cinctus, have focused exclusively on interactions between mothers and offspring. Here we ask whether these interactions occur in a social context that extends beyond the family unit of a mother and her own genetic offspring. Such social structure can arise from behaviors that occur before eggs are laid, or from actions of individuals that occur post-hatching. We present field data showing that lay sites of mothers are spatially aggregated on a scale that would lead to behavioral interactions among families. Microsatellite markers suggest neighboring mothers are unrelated. Laboratory experiments do not support the hypothesis that spatial aggregation results from a direct attraction of females to one another. Other laboratory studies reported here indicate that, after hatching, unrelated clutches sometimes join together to form multifamily groups. Experiments reveal that mothers are not necessary for these joining events to occur. In sum, these data suggest that both mothers and offspring play active, but different, roles in generating the social environment in which offspring rearing occurs.Communicated by N. Wedell     

Baselines for land-use change in the tropics: application to avoided deforestation projects

Although forest conservation activities, particularly in the tropics, offer significant potential for mitigating carbon (C) emissions, these types of activities have faced obstacles in the policy arena caused by the difficulty in determining key elements of the project cycle, particularly the baseline. A baseline for forest conservation has two main components: the projected land-use change and the corresponding carbon stocks in applicable pools in vegetation and soil, with land-use change being the most difficult to address analytically. In this paper we focus on developing and comparing three models, ranging from relatively simple extrapolations of past trends in land use based on simple drivers such as population growth to more complex extrapolations of past trends using spatially explicit models of land-use change driven by biophysical and socioeconomic factors. The three models used for making baseline projections of tropical deforestation at the regional scale are: the Forest Area Change (FAC) model, the Land Use and Carbon Sequestration (LUCS) model, and the Geographical Modeling (GEOMOD) model. The models were used to project deforestation in six tropical regions that featured different ecological and socioeconomic conditions, population dynamics, and uses of the land: (1) northern Belize; (2) Santa Cruz State, Bolivia; (3) Paraná State, Brazil; (4) Campeche, Mexico; (5) Chiapas, Mexico; and (6) Michoacán, Mexico. A comparison of all model outputs across all six regions shows that each model produced quite different deforestation baselines. In general, the simplest FAC model, applied at the national administrative-unit scale, projected the highest amount of forest loss (four out of six regions) and the LUCS model the least amount of loss (four out of five regions). Based on simulations of GEOMOD, we found that readily observable physical and biological factors as well as distance to areas of past disturbance were each about twice as important as either sociological/demographic or economic/infrastructure factors (less observable) in explaining empirical land-use patterns. We propose from the lessons learned, a methodology comprised of three main steps and six tasks can be used to begin developing credible baselines. We also propose that the baselines be projected over a 10-year period because, although projections beyond 10 years are feasible, they are likely to be unrealistic for policy purposes. In the first step, an historic land-use change and deforestation estimate is made by determining the analytic domain (size of the region relative to the size of proposed project), obtaining historic data, analyzing candidate baseline drivers, and identifying three to four major drivers. In the second step, a baseline of where deforestation is likely to occur–a potential land-use change (PLUC) map—is produced using a spatial model such as GEOMOD that uses the key drivers from step one. Then rates of deforestation are projected over a 10-year baseline period based on one of the three models. Using the PLUC maps, projected rates of deforestation, and carbon stock estimates, baseline projections are developed that can be used for project GHG accounting and crediting purposes: The final step proposes that, at agreed interval (e.g., about 10 years), the baseline assumptions about baseline drivers be re-assessed. This step reviews the viability of the 10-year baseline in light of changes in one or more key baseline drivers (e.g., new roads, new communities, new protected area, etc.). The potential land-use change map and estimates of rates of deforestation could be re-done at the agreed interval, allowing the deforestation rates and changes in spatial drivers to be incorporated into a defense of the existing baseline, or the derivation of a new baseline projection.     

The Monitoring and Risk Assessment of Zn Deposition Around a Metal Smelter in Latvia

Heavy metal concentrations in Hylocomium splendens collected around a metal smelter in Latvia showed very high concentrations of Zn (>200 g/g), and elevated concentrations of Pb (38.3 g/g) and Cu (18.3 g/g). In an attempt to better evaluate the potential toxicity of the high Zn concentrations, a serial elution method was used to determine the concentrations of zinc in intercellular, extracellular exchangeable cell wall, intracellular, and particle fractions. The intercellular Zn concentrations represent the water soluble component of the total concentrations, and were low with no clear trends. Zn concentrations in the extra- and intracellular and particle fractions decreased exponentially from the pollutant source. Intracellular Zn concentrations in moss close to the emission source are within the range considered to be potentially toxic, from other single element exposure studies. The proportion of Zn in the relatively insoluble particle fraction, which is least associated with environmental risk, was greater closer to the pollution source, reaching > 30% in the oldest Hylocomium splendens segments.     

LogD: lipophilicity for ionisable compounds

The octanol/water partition coefficient (Kow) for organic compounds is widely used in predictive environmental studies. A significant proportion of contaminants of surface and ground water are ionisable (e.g. many pesticides, pharmaceuticals, metabolites). Such compounds may be partially ionised dependent on the pH. Since the neutral and ionic species exhibit different polarities, the Kow value of ionisable pesticides is pH dependent. It is therefore essential to determine Kow values over the full range of pH that occurs in the environment in order to get appropriate predictors. Numerous methods are available to measure lipophilicity but only a few are appropriate for ionisable pesticides (e.g. pH metric and filter probe methods). Parameters such as pH and ionic strength need to be carefully controlled when working with ionisable compounds. Variation of these factors probably explains why literature can yield Kow values that differ by more than one order of magnitude for some compounds. In this article, Kow values obtained for six acidic pesticides with three different methods are compared as well (data from the literature, measured by pH metric method and calculated with five computer programs). The values used in predictive regression equations needs to be either measured with a suitable method or selected from the literature with great care.     

Biosensors for detection of mercury in contaminated soils

Biosensors based on whole bacterial cells and on bacterial heavy metal binding protein were used to determine the mercury concentration in soil. The soil samples were collected in a vegetable garden accidentally contaminated with elemental mercury 25 years earlier. Bioavailable mercury was measured using different sensors: a protein-based biosensor, a whole bacterial cell based biosensor, and a plant sensor, i.e. morphological and biochemical responses in primary leaves and roots of bean seedlings grown in the mercury-contaminated soil. For comparison the total mercury concentration of the soil samples was determined by AAS. Whole bacterial cell and protein-based biosensors gave accurate responses proportional to the total amount of mercury in the soil samples. On the contrary, plant sensors were found to be less useful indicators of soil mercury contamination, as determined by plant biomass, mercury content of primary leaves and enzyme activities.     

Soybean production and conversion of tropical forest in the Brazilian Amazon: the case of Vilhena, Rondônia

The recent rise in Brazilian soybean production has generated concern among the environmental community and some authors that natural tropical environments of the Amazon Basin are being converted to soybean fields. Proponents of soybean production counter that soybeans represent a viable agricultural commodity for the region; environmental concern is unwarranted, because new soybean fields are replacing already deforested or otherwise transformed lands. Both arguments have been made without comprehensive study and measure of land-use/land-cover (LULC) in areas undergoing expansion of soybean production. This case study, conducted in the municipality of Vilhena, Rond?nia, Brazil, in the southwestern Amazon Basin, uses remote sensing to evaluate the LULC accompanying this municipality's large growth in soybean production from 1996 to 2001. Forests are being converted for soybean production, but most of the production increase appears attributable to slight expansion of already existing fields, conversion of already deforested land, and higher yields.     

The transformation of outdoor ammonium nitrate aerosols in the indoor environment

Recent studies associate particulate air pollution with adverse health effects; however, the exposure to indoor particles of outdoor origin is not well characterized, particularly for individual chemical species. We conducted a field study in an unoccupied, single-story residence in Clovis, California to provide data and analyses to address issues important for assessing exposure. We used real-time particle monitors both outdoors and indoors to quantify nitrate, sulfate, and carbon particulate matter of particle size 2.5 μm or less in diameter (PM-2.5). The results show that measured indoor ammonium nitrate concentrations were significantly lower than would be expected based solely on penetration and deposition losses. The additional reduction can be attributed to the transformation indoors of ammonium nitrate into ammonia and nitric acid gases, which are subsequently lost by deposition and sorption to indoor surfaces. A mass balance model that accounts for the kinetics of ammonium nitrate evaporation was able to reproduce measured indoor ammonium nitrate and nitric acid concentrations, resulting in a fitted value of the deposition velocity for nitric acid of 0.56 cm s⁻¹. The results indicate that indoor exposure to outdoor ammonium nitrate in Central Valley of California are small, and suggest that exposure assessments based on total particle mass measured outdoors may obscure the actual causal relationships for indoor exposure to particles of outdoor origin.